We are pleased to announce the launch of our brand new Sherex website! It has been completely overhauled from top to bottom with additional product listings and a completely new navigation system, designed to help you find the optimal fastener. For more information, go to our website via the link below, or call us at:  (866) 474-3739. 

Read More

Nautic Partners, LLC (“Nautic”) is pleased to announce that it has completed the acquisition of LindFast Solutions Group (“LindFast”), in partnership with LindFast management.

Headquartered in Blaine, MN, LindFast is a master distributor of specialty fasteners in the North American market serving a broad base of national, regional, and local distribution customers through its metric (Lindstrom) and imperial (Stelfast) product brands. As a master distributor, LindFast provides an important link in the fastener supply chain by offering a deep inventory as a “virtual warehouse” of approximately 130,000 low volume, slow moving SKUs that distribution customers need quickly but are non-economical to inventory and source themselves. These SKUs represent high‐touch, specialty products that can be difficult to source due to their unique length, diameter, thread pitch, metal choice, or finish. In addition to sourcing unique product and providing virtual warehouse services, LindFast provides its distribution customers a range of value‐added services such as break bulk, packaging, kitting, plating, coating, and guaranteed stock programs, among others.

Read More

Infographic: Single-Turn Wave Springs vs. Stamped Wave Washers

One of the most common questions our Engineering team gets is customers wanting to know the difference between Rotor Clip's Single-Turn Wave Springs and traditional Stamped Wave Washers.

Read More

ELMHURST, IL - Semblex Corporation has announced the upcoming retirement of Don
Cunningham, the company’s President since 2010. Mr. Cunningham’s retirement will be
effective at the end of the first quarter, 2019. Mr. Cunningham will then continue as a member
of the Semblex Board of Directors and as a part time advisor to the company.

Jinsoo Kim will succeed Mr. Cunningham as president of Semblex. Mr. Kim has served as Chief
Operating Officer at Semblex since the company’s acquisition by Jinhap Company, Ltd in early
2014. Previously, Mr. Kim was a Senior Vice President at Jinhap in South Korea.




Read More

From Rotor Clip

Pneumatic robotic parallel grippers are used in applications that require automated picking up of parts and assemblies.  They can be configured to grip the outside edges of a work piece, or open out to put pressure on the inside of a work piece. READ MORE

EFC International, a leading supplier of engineered fasteners, is pleased to announce the approval of Sherex Fastening Solution’s Large Size rivet nuts for use in steel utility poles by a leading energy company. The approval is in accordance with the Specification for Tubular Steel Pole Transmission Line Structures SES-PD-027. The specification covers the minimum requirements for the design, drawings, material, fabrication, welding, coating, inspection, and delivery of tubular steel pole structures.

Sherex Large Size rivet nuts eliminate the welding process and reduce the number of components for installation. They also allow for a safer, one-handed installation of the step bolts in the field. “This is a significant cost savings for pole and tower manufacturers and we are excited to bring this product to the market,” states Paul Musgrove, Industrial and Distribution Sales Manager.

Read More

From Rotor Clip

The next time you see the jaws of an alligator figure open and snap shut or a haunted house monster reach for you as you pass by, chances are you are seeing a pneumatic actuator in action. READ MORE

Custom Rivet Nuts

Do you have a fastening challenge that you need help with? Our Sherex engineering team has a deep understanding of base materials, fastening technology, and manufacturing processes, and can create custom designed solutions for your specific application. After design approval, we manufacture your custom parts in one of our ISO certified production facilities. Here are a few examples of custom engineered rivet nuts our team has designed:

Read More

ROCKY RIVER, OH–-Earnest Machine is now offering DIN spec metric hex head cap screws in response to increased demand in the marketplace.

“ISO metric hex head cap screws have been part of our product line for years,” said Kirk Zehnder, CEO of Earnest Machine. “However, we’re seeing a rise in the demand for metric product, due to globalization and the increase of imported heavy equipment. Many repairs now call for metric pieces.”

Read More

DON'T DISCARD THAT LEFTOVER RETAINING RING

Read More

September 12, 2018 (Santa Fe Springs, CA) - Judging for the 2018 Pro Tool Innovation Awards completed this week and Brighton-Best International received two PTIA awards for products from the new Proferred line. 

The winning products include Proferred Drywallerz™ (P64040) and the Proferred 8” Ratcheting Adjustable Wrench (T09002).

Read More

St. Louis, Missouri – September 11, 2018. Guenter Retkowski, Vice President of International Sales, is pleased to announce the team expansion for global growth. New team members will support EFC’s expansion in targeted regions and markets, including Autonomous Vehicles, Electric Vehicles, and Industrial markets.

Shanghai EFC Fasteners Col. Ltd. added seven team members: Director of Sales, Zhanchun Gu; Tina Li, Buyer; Dan Gong, Sales Engineer; Inside Sales Account Managers, Sunny Li, Gloria Shen, and Seven Shen; Logistics Coordinator, Carina Liang. Their collaboration with the existing EFC team, customers and suppliers within China has been significant to growth.

Read More

Compression Limiters

 

Read More

Despite an extensive standard catalog stock of  carbon steel and stainless steel with various dimensions and spring characteristics, some applications are not served with a standard stock retaining ring or flat wire wave spring. In these instances, Rotor Clip can produce a  custom part according to your unique specifications. 

With Rotor Clip, you can be certain that you get the assistance and answers that you seek before, during, and after you purchase from us. We have a dedicated and highly trained team of professionals to help you get the answers you seek. From pricing, lead times, logistics to part specs, application design assistance, and feasibility studies; our team has the answer 

Read More

California Proposition 65

Read More

What Are You Building?

Read More

Sick of summer weather and moisture corroding your steel parts?

Check out this month's newsletter to see how Rotor Clip's exclusive zinc phosphate finishes offers maximum corrosion protection. Our dry phosphate and phosphate and oil finishes come standard, with no additional cost.

See why our phosphate finishes are specified for in countless applications, and call or email us for free samples or engineer consultations today. READ MORE

Disc-Lock Safety Wheel Nuts

Are you experiencing issues with loose wheel nuts? Our Disc-Lock safety wheel nuts prevent vibrational loosening Utilizing a patented 3 piece design, Disc-Lock safety wheel nuts secure wheels in heavy load and vibration applications, from trash trucks and buses to tractor trailers.
  • Available in sizes from 3/4 to 7/8 (M18-M22)
  • Easy to install with standard tools
  • No retightening needed after installation
  • Can be used with Class 10.9, Grade 8 bolts
  • Coated in GEOMET 321, providing up to 720 hours protection in salt spray testing (other coatings available upon request)
  • Vibration proof according to MIL-STD-1312-7

Do you use materials of multiple or variable thicknesses? If so, CPB and CPN rivet nuts may be the best solution for your application! CPB/CPN parts offer a large grip range, allowing them to be easily used in multiple different material thicknesses. Their large backside footprint provides increased pull out resistance. CPB/CPN parts are designed to be installed in soft materials like plastics without distorting the base material, an ideal solution for your lightweighting initiatives.
 
Sherex CPN and CPB rivet nuts come in sizes ranging from 8-32 to 5/16-18 (M5-M8), and are available in wedge head or trim head variants. CPB rivet nuts are pre-bulbed for ease of installation and can be installed with spin-spin tooling.




Sherex's engineering team designed the industry's largest rivet nut product line.

The Challenge:
  • The OEM was experiencing production bottlenecks and difficult in-field installations due to the use of a welded clip; the clip was frequently damaged during shipping or misaligned during welding.
The Solution:
  • Sherex created a large size rivet nut with an oversized thread for use with standard step bolts.
  • Utilizing the rivet nut solution, the manufacturer was able to laser cut holes into the pole, ensuring proper spacing and alignment of the holes.
  • The elimination of the welding process, the clip, and one of the hex nuts involved in the previous assembly sped up production and made installation a one hand operation, making it much safer and quicker.
The Sherex engineering team is available to assist you with your fastening challenges. Contact us at [email protected] or call 866-474-3739 for more information.
.

Sherex Fastening Solutions, a global leader in engineered fasteners, tooling, and automation, is pleased to announce that their Sherex Taiwan production facility has received IATF 16949:2016 certification.

IATF 16949:2016, which establishes specific quality management system requirements for the automotive market, replaces ISO/TS 16949:2009. To gain accreditation, businesses must possess quality systems that focus on continuous improvement to prevent defects, and eleminate high variation and waste throughout the supply chain.

Read More

Solid Pins are common fasteners used for aligning, joining, and assembling multiple components. Solid Pins are most useful where the clamp load of a bolt is not needed. They are also used for specific functions such as locating components, hinges, tamper-resistant designs, etc. READ MORE