Filtered by category: Clear Filter

Joe Greenslade in Memoriam

We were all shocked and saddened to learn that Joe Greenslade passed away suddenly on Wednesday, October 23, at age 71.

Joe served as IFI’s Technical Director from 2007 until 2015. He was a fastener industry icon and highly respected and admired. Joe had a refreshing “can do” approach, an ability to build consensus, a knack for simple solutions, and a gentle, kind and jovial personality that endeared him to all. Joe thoroughly enjoyed working in the fastener industry and was always fully committed to completing anything he set out to accomplish.

Read More

Joe Greenslade Memorial Service

We were shocked and saddened to learn last week that Joe Greenslade passed away suddenly on Wednesday, October 23.

Service Details
Saturday, November 2, 201912:00 Noon
Unity Church of Fort Worth 5051 Trail Lake Drive #2045
Ft. Worth, TX 76133


Read More

Suzy Cravens of Advance Components competes in Food Network’s Christmas Cookie Challenge

With the arrival of Fall and the turning of leaves, it’s time for Suzy Cravens to start thinking about cookies. “Not just any kind of cookies, but highly decorated cookies,” says Suzy.

It all started back in the 1990s, when Suzy, a self-professed crafter, sewer, baker, and all-around handy gal, decided to venture into the world of cake decorating to satisfy her creative whimsy. After taking several classes she started teaching cake and cookie decorating in her spare time. She also began a home cake decorating business which eventually led to her becoming quite well known in the area as the Cake Lady.

Read More

Sad News – Joe Greenslade

We were shocked and saddened to learn this morning that Joe Greenslade passed away suddenly last night. 

Joe served as Technical Director for the Industrial Fasteners Institute from 2007 until 2015. He was a fastener industry icon, having started his career in 1970 working for various fastener manufacturers before founding Greenslade and Company in 1978.  He sold the company in 2007 and came to work for the IFI.  In a recent conversation with IFI managing director, Joe said that working for IFI had been his dream job.  You could tell he thoroughly enjoyed working in the industry, and he put 100% of his effort into anything he set out to accomplish.

Joe retired from IFI in 2015 when Salim Brahimi took over as Technical Director.  Joe stayed on as a special consultant to IFI, maintaining the upkeep of the IFI Technology Connection software that he had developed and is relied upon by many companies today.

Please keep Joe’s wife, family and colleagues in your thoughts and prayers today.  We will notify you again once we know more details about services or charities for donations.

EFC International Launches Power BI, Linked to SAP and CRM

ST. LOUIS, MISSOURI. September 12, 2019 - Engineered fastener and components distributor, EFC International, continues to “Redefine the World of Distribution”, exhibited in part by the company’s recent implementation of Power BI (from Microsoft). Power BI is linked to their internal SAP operating system and CRM software.

EFC has been at the leading edge of the industrial distribution industry, embracing and implementing advanced innovative technology and digital transformation. Matt Dudenhoeffer, CEO, stated “EFC’s implementation of Power BI provides our team with a powerful business analytics tool that delivers real-time interactive dashboards customized to our business strategy and performance metrics. Our SAP and CRM systems are incredibly versatile in enabling customized reports for our suppliers and customers, and now we can take that a step further with interactive visualizations through a simple interface.”

Read More

EFC International Swing Couplings -- Improve Your Production Costs

EFC International provides safe and high quality swing couplings for hydraulic, pneumatic, vacuum, gas, chemical fluid and water applications. The swing couplings are manufactured with the latest technologies to provide production methods that achieve efficiency, increase plant safety, improve productivity and save costs for industrial connections.

Read More

Rotor Clip: Celebrating 10 Years of Wave Springs with one TINY announcement

We're celebrating 10 years of manufacturing the world's best Wave Springs this summer with one TINY announcement!
Rotor Clip's proud to announce that we are able to produce wave springs as small as 3mm O.D.!

(That's .118 inches)

Read More

EFC International Provides Light-Weighting Solution For Attaching Carbon Fiber & Composite Panels

EFC International’s offering of the BCT Rivet nut is a best practice light-weighting solution for attaching carbon fiber and composite panels in automotive.  The rivet nuts are manufactured by BBA with BCT® (Bulge Control Technology).

BCT Rivet Nuts are ultra-high strength and engineered to prevent cracking or delamination of carbon fiber panels. The patented design enables an engineered yield point on the body of the rivet nut ensuring the bulge formation always begins beyond the panel and is drawn back on the panel. BCT rivet nuts can be placed near the edge of the panel without fear of inducing a crack in the panel.

Read More

Introducing the New and Improved Sherex Website!

We are pleased to announce the launch of our brand new Sherex website! It has been completely overhauled from top to bottom with additional product listings and a completely new navigation system, designed to help you find the optimal fastener. For more information, go to our website via the link below, or call us at:  (866) 474-3739. 

Read More

Rotor Clip Product Spotlight: Flat Wire Single-Turn Wave Springs

Infographic: Single-Turn Wave Springs vs. Stamped Wave Washers

One of the most common questions our Engineering team gets is customers wanting to know the difference between Rotor Clip's Single-Turn Wave Springs and traditional Stamped Wave Washers.

Read More

Nautic Partners Announces Acquisition of LindFast Solutions Group in Partnership with Management

Nautic Partners, LLC (“Nautic”) is pleased to announce that it has completed the acquisition of LindFast Solutions Group (“LindFast”), in partnership with LindFast management.

Headquartered in Blaine, MN, LindFast is a master distributor of specialty fasteners in the North American market serving a broad base of national, regional, and local distribution customers through its metric (Lindstrom) and imperial (Stelfast) product brands. As a master distributor, LindFast provides an important link in the fastener supply chain by offering a deep inventory as a “virtual warehouse” of approximately 130,000 low volume, slow moving SKUs that distribution customers need quickly but are non-economical to inventory and source themselves. These SKUs represent high‐touch, specialty products that can be difficult to source due to their unique length, diameter, thread pitch, metal choice, or finish. In addition to sourcing unique product and providing virtual warehouse services, LindFast provides its distribution customers a range of value‐added services such as break bulk, packaging, kitting, plating, coating, and guaranteed stock programs, among others.

Read More

Semblex Senior Management Changes

ELMHURST, IL - Semblex Corporation has announced the upcoming retirement of Don
Cunningham, the company’s President since 2010. Mr. Cunningham’s retirement will be
effective at the end of the first quarter, 2019. Mr. Cunningham will then continue as a member
of the Semblex Board of Directors and as a part time advisor to the company.

Jinsoo Kim will succeed Mr. Cunningham as president of Semblex. Mr. Kim has served as Chief
Operating Officer at Semblex since the company’s acquisition by Jinhap Company, Ltd in early
2014. Previously, Mr. Kim was a Senior Vice President at Jinhap in South Korea.




Read More

Robotic Hands get a grip on savings with Rotor Clip Retaining Rings

From Rotor Clip

Pneumatic robotic parallel grippers are used in applications that require automated picking up of parts and assemblies.  They can be configured to grip the outside edges of a work piece, or open out to put pressure on the inside of a work piece. READ MORE

EFC International Introduces Innovative Fastening Solution For Utility Poles

EFC International, a leading supplier of engineered fasteners, is pleased to announce the approval of Sherex Fastening Solution’s Large Size rivet nuts for use in steel utility poles by a leading energy company. The approval is in accordance with the Specification for Tubular Steel Pole Transmission Line Structures SES-PD-027. The specification covers the minimum requirements for the design, drawings, material, fabrication, welding, coating, inspection, and delivery of tubular steel pole structures.

Sherex Large Size rivet nuts eliminate the welding process and reduce the number of components for installation. They also allow for a safer, one-handed installation of the step bolts in the field. “This is a significant cost savings for pole and tower manufacturers and we are excited to bring this product to the market,” states Paul Musgrove, Industrial and Distribution Sales Manager.

Read More

Who’s Afraid of the Big, Bad Pneumatic Actuator?

From Rotor Clip

The next time you see the jaws of an alligator figure open and snap shut or a haunted house monster reach for you as you pass by, chances are you are seeing a pneumatic actuator in action. READ MORE

Benefits of eliminating welding from steel attachments

Custom Rivet Nuts

Do you have a fastening challenge that you need help with? Our Sherex engineering team has a deep understanding of base materials, fastening technology, and manufacturing processes, and can create custom designed solutions for your specific application. After design approval, we manufacture your custom parts in one of our ISO certified production facilities. Here are a few examples of custom engineered rivet nuts our team has designed:

Read More

Earnest Machine Adds Metric Hex Head Cap Screws to Product line

ROCKY RIVER, OH–-Earnest Machine is now offering DIN spec metric hex head cap screws in response to increased demand in the marketplace.

“ISO metric hex head cap screws have been part of our product line for years,” said Kirk Zehnder, CEO of Earnest Machine. “However, we’re seeing a rise in the demand for metric product, due to globalization and the increase of imported heavy equipment. Many repairs now call for metric pieces.”

Read More

Brighton-Best International Proferred Brand Wins Two Pro Tool Innovation Awards

September 12, 2018 (Santa Fe Springs, CA) - Judging for the 2018 Pro Tool Innovation Awards completed this week and Brighton-Best International received two PTIA awards for products from the new Proferred line. 

The winning products include Proferred Drywallerz™ (P64040) and the Proferred 8” Ratcheting Adjustable Wrench (T09002).

Read More

Don't Discard That Leftover Retaining Ring

DON'T DISCARD THAT LEFTOVER RETAINING RING

Read More

EFC International Welcomes Global Team Members

St. Louis, Missouri – September 11, 2018. Guenter Retkowski, Vice President of International Sales, is pleased to announce the team expansion for global growth. New team members will support EFC’s expansion in targeted regions and markets, including Autonomous Vehicles, Electric Vehicles, and Industrial markets.

Shanghai EFC Fasteners Col. Ltd. added seven team members: Director of Sales, Zhanchun Gu; Tina Li, Buyer; Dan Gong, Sales Engineer; Inside Sales Account Managers, Sunny Li, Gloria Shen, and Seven Shen; Logistics Coordinator, Carina Liang. Their collaboration with the existing EFC team, customers and suppliers within China has been significant to growth.

Read More